Exhaust Fabrication Parts

Exhaust Fabrication Parts

Here you can find all d-i-y exhaust parts for every need.

Items 1-32 of 63

Set Descending Direction
  1. 4-1 Collector Blank 4x45mm In - 3" Out, AISI304 stainless
    Martelius
    4-1 Collector Blank 4x45mm In - 3" Out, AISI304 stainless
    4-1 collector blank for exhaust manifold. Edges shaped for max 4x45mm primary tubes. Outlet is 3" OD. Material AISI304 stainless steel. Sold as 1/piece.
    €48.39
  2. Band Clamp 3" / 80mm Low Profile, AISI304 stainless
    Martelius
    Band Clamp 3" / 80mm Low Profile, AISI304 stainless
    Low profile stainless steel clamp for 3" / 80mm sleeve. These are good for lowered cars or when clamp is in a tight space. Also can be used as clamp for outlet tip to make appearance look more modest.
    €10.00
  3. Bend 76,2x1.0mm 30 Degrees AISI304 Stainless Ultralight
    Martelius
    Bend 76,2x1.0mm 30 Degrees AISI304 Stainless Ultralight
    Mandrel bent extra lightweight stainless steel bend with only 1.0mm wall thickness. Outer diameter 3" / 76,2mm, bending radius 150mm. No sleeve at the end, so fits well for tig welding.
    €20.00
  4. Bend 76,2x1mm 15 Degrees AISI304 Stainless Ultralight
    Martelius
    Bend 76,2x1mm 15 Degrees AISI304 Stainless Ultralight
    Mandrel bent extra lightweight stainless steel bend with only 1.0mm wall thickness. Outer diameter 3" / 76,2mm, bending radius 150mm. No sleeve at the end, so fits well for tig welding.
    €20.00
  5. Bend 76,2x1mm 45 Degrees AISI304 Stainless Ultralight
    Martelius
    Bend 76,2x1mm 45 Degrees AISI304 Stainless Ultralight
    Mandrel bent extra lightweight stainless steel bend with only 1.0mm wall thickness. Outer diameter 3" / 76,2mm, bending radius 150mm. No sleeve at the end, so fits well for tig welding.
    €20.00
  6. Bend 76,2x1mm 55 Degrees AISI304 Stainless Ultralight
    Martelius
    Bend 76,2x1mm 55 Degrees AISI304 Stainless Ultralight
    Mandrel bent extra lightweight stainless steel bend with only 1.0mm wall thickness. Outer diameter 3" / 76,2mm, bending radius 150mm. No sleeve at the end, so fits well for tig welding.
    €20.00
  7. Bend 76,2x1mm 85 Degrees AISI304 Stainless Ultralight
    Martelius
    Bend 76,2x1mm 85 Degrees AISI304 Stainless Ultralight
    Mandrel bent extra lightweight stainless steel bend with only 1.0mm wall thickness. Outer diameter 3" / 76,2mm, bending radius 150mm. No sleeve at the end, so fits well for tig welding.
    €22.00
  8. Exhaust sealing putty
    Martelius
    Exhaust sealing putty
    Tiivistää pakoputken liitokset, suositellaan aina käytettäväksi muhviliitoksiin.
    €8.06
  9. Flexible bellow 3" L=100mm AISI304 stainless
    Martelius
    Flexible bellow 3" L=100mm AISI304 stainless
    Triple layer, durable flex bellow with interlock inner layer. Overall length 102 mm - 4in. Largest outer diameter 106 mm - 4.17in. 76 mm OD tube will slide into the bellow for 20 mm length, which make
    €24.11
  10. Flexible bellow 3" L=200mm AISI304 Stainless
    Martelius
    Flexible bellow 3" L=200mm AISI304 Stainless
    Triple layer, durable flex bellow with interlock inner layer. Overall length 203 mm - 8in. Largest outer diameter 106 mm - 4.17in. 76 mm OD tube will slide into the bellow for 20 mm length, which make
    €24.11
  11. Martelius 3" Muffler,  3,5" outlet tip AISI304 stainless
    Martelius
    Martelius 3" Muffler, 3,5" outlet tip AISI304 stainless
    Inlet size 3" with sleeve connection, outlet tip size 89mm. Muffler lenght 300mm, Overall lenght 490mm
    €169.35
  12. Martelius Muffler d=190mm L=300mm 3" AISI304 stainless
    Martelius
    Martelius Muffler d=190mm L=300mm 3" AISI304 stainless
    Outlet sale, only 1pc available. This is an unused proto muffler, with straight trough design. Diameter 190mm, lenght 300mm and 3" tubing size. Inlet/outlet on the same side. No sleeves, installation
    €120.97
Page
per page