Exhaust Fabrication Parts

Turvakaarikehikon tekoon. Materiaali AKK sääntökirjan mukainen saumaton putki. Pääkaari merkitty viitteeliseen kuvaan vihreällä. Katon kaarevuuden vuoksi pääkaaressa on 5 taivutusta.

Fits Saab 1.9l TID + Opel 1.9l CDTI + Fiat / Alfa Romeo 1.9l JTD Engines. Material is 12mm thick steel.

Sopii B204 / B234 / B205/ B235 moottoreihin

For models with dual outlets from factory. For smaller 58 liter fuel tank.

For models with dual outlets from factory. For bigger 61 liter fuel tank.

Material is AISI304 stainless steel and tubing size 3". Comes with 3" -> 60mm adapter to fit into stock exhaust also. Includes M14 thread EGT sensor bung and plug for it if not used  (only some

Material is AISI304 stainless steel and tubing size 3". Comes with 3" -> 60mm adapter to fit into stock exhaust also. Includes M14 thread EGT sensor bung and plug for it if not used  (only some

Material is AISI304 stainless steel and tubing size 3". Comes with 3" -> 60mm adapter to fit into stock exhaust also. Includes M14 thread EGT sensor bung and plug for it if not used  (only some

Downpipe flange + sealing cone fro building your own downpipe. Cone is a separate piece and flange has a machined groove for it. Bolt-pattern is 90mm, inside hole 60mm. Material 10mm steel. Fits all S

TD04-19T "Billet" Saab 9-5 & Saab 9-3 Bolt-on turbo. This is a very good upgrade for Aero Saabs or a replacement for Garrett GT1752 originla turbo. If you upgrade from GT17 then you also need new

Easy upgrade for Saab 9-5 and Saab 9-3 for upgrading into a 15T or 19T Mitsubishi turbo from a standard Garrett GT17. You will need this kit for bolt-on installation when you upgrade from Garrett into

TD04HL 20T A/R 7CM Billet upgrade Saab 9-5 / 9-3 bolt on. 49189-01810 / 49189-01850 19T TD04 Saab 19T ( King Cobra connection ) This turbo is based on the original TD04HL-15T short nose that came in

Material is AISI304 stainless steel, tubing size 76,2mm. Fits all petrol turbo models 2.0t / 2.3t / 2.3T AERO. Including 2006-> automatic transmission models. Fitting into stock exhaust require

Material is AISI304 stainless steel, tubing size 76,2mm. Fits all petrol turbo models 2.0t / 2.3t / 2.3T AERO. Including 2006-> automatic transmission models. Fitting into stock exhaust require

Material is AISI304 stainless steel, tubing size 76,2mm. Fits all petrol turbo models 2.0t / 2.3t / 2.3T AERO. Including 2006-> automatic transmission models. Fitting into stock exhaust require

With this adapter you can join JT Tuning Saab 9-5 downpipe into stock exhaust or for example Simons catback exhaust.