Products By Car
Here you can find all model specific parts for your car.
We carry out all exhaust solutions optimized for their specific end use purpose be it motorsport, tuned street vehicles, restored vehicles or industrial use.
Filter by
Car Make
Car Model
Category
- MarteliusPääkaari Saab 99 45x2,5mm saumatonTurvakaarikehikon tekoon. Materiaali AKK sääntökirjan mukainen saumaton putki. Pääkaari merkitty viitteeliseen kuvaan vihreällä. Katon kaarevuuden vuoksi pääkaaressa on 5 taivutusta.€198.39
- MarteliusSaab / Opel / Alfa / Fiat 1.9 TID / JTD / CDTI Exhaust manifold flange 12mm FeFits Saab 1.9l TID + Opel 1.9l CDTI + Fiat / Alfa Romeo 1.9l JTD Engines. Material is 12mm thick steel.€29.27
- SimonsSaab 9-3 Aero dual outlet cat back exhaustFor models with dual outlets from factory. For smaller 58 liter fuel tank.€680.23
- SimonsSaab 9-3 Aero dual outlet cat back exhaustFor models with dual outlets from factory. For bigger 61 liter fuel tank.€680.23
- JT-TuningSaab 9-3 SS 2.0 Turbo 3" Downpipe 100cpsi FIA cat 2003-2011Material is AISI304 stainless steel and tubing size 3". Comes with 3" -> 60mm adapter to fit into stock exhaust also. Includes M14 thread EGT sensor bung and plug for it if not used (only some€590.00
- JT-TuningSaab 9-3 SS 2.0 Turbo 3" Downpipe 200cpsi 2003-2011Material is AISI304 stainless steel and tubing size 3". Comes with 3" -> 60mm adapter to fit into stock exhaust also. Includes M14 thread EGT sensor bung and plug for it if not used (only some€570.00
- JT-TuningSaab 9-3 SS 2.0 Turbo 3" Downpipe Decat 2003-2011Material is AISI304 stainless steel and tubing size 3". Comes with 3" -> 60mm adapter to fit into stock exhaust also. Includes M14 thread EGT sensor bung and plug for it if not used (only some€460.90
- MarteliusSaab 9-3 SS 2.0 Turbo downpipe flange + coneDownpipe flange + sealing cone fro building your own downpipe. Cone is a separate piece and flange has a machined groove for it. Bolt-pattern is 90mm, inside hole 60mm. Material 10mm steel. Fits all S€36.29
- TD04-19T "Billet" Saab 9-5 & Saab 9-3 Bolt-on turbo. This is a very good upgrade for Aero Saabs or a replacement for Garrett GT1752 originla turbo. If you upgrade from GT17 then you also need new€560.00
- Easy upgrade for Saab 9-5 and Saab 9-3 for upgrading into a 15T or 19T Mitsubishi turbo from a standard Garrett GT17. You will need this kit for bolt-on installation when you upgrade from Garrett into€115.00
- TD04HL 20T A/R 7CM Billet upgrade Saab 9-5 / 9-3 bolt on. 49189-01810 / 49189-01850 19T TD04 Saab 19T ( King Cobra connection ) This turbo is based on the original TD04HL-15T short nose that came in€725.00
- JT-TuningSaab 9-5 1998-2010 3" dowpipe 100CPSI FIA cat stainlessMaterial is AISI304 stainless steel, tubing size 76,2mm. Fits all petrol turbo models 2.0t / 2.3t / 2.3T AERO. Including 2006-> automatic transmission models. Fitting into stock exhaust require€486.00
- JT-TuningSaab 9-5 1998-2010 3" dowpipe 200CPSI cat stainlessMaterial is AISI304 stainless steel, tubing size 76,2mm. Fits all petrol turbo models 2.0t / 2.3t / 2.3T AERO. Including 2006-> automatic transmission models. Fitting into stock exhaust require€466.03
- JT-TuningSaab 9-5 1998-2010 3" dowpipe decat stainlessMaterial is AISI304 stainless steel, tubing size 76,2mm. Fits all petrol turbo models 2.0t / 2.3t / 2.3T AERO. Including 2006-> automatic transmission models. Fitting into stock exhaust require€264.49
- JT-TuningSaab 9-5 Downpipe AdapterWith this adapter you can join JT Tuning Saab 9-5 downpipe into stock exhaust or for example Simons catback exhaust.€64.52